Gamdias Athena E1 Elite Tempered Glass RGB Mid-Tower Chassis
₨ 14,500
- Uniquely Designed Mesh-Patterned Front Panel
- 1 Built-in 120 mm ARGB Fan (Front Panel)
- ARGB Sync Via Motherboard
- Magnetic Dust Filter
- Panoramic Tempered Glass
- A tap of your fingertip to initiate RGB lighting-effect adjustments / swap
- Small Form Factor Design
- Hyper-Efficient I/O Ports
- 3 Slot Vertical VGA Slot
Gamdias Athena E1 Elite Tempered Glass RGB Mid-Tower Chassis
An Unique Design & Efficient Airflow
Adopting to an uniquely designed mesh patterned front panel alongside of a built-in 120 mm ARGB fan, ATHENA E1 Elite provides not only an unique appearance, but also offers maximized airflow throughout your stunning battle-station.
One Tap, Sync All
The ATHENA E1 Elite is capable of initiating an RGB sync to any Motherboard that comes in with a 5V 3-Pin addressable header to achieve a system-wide RGB synchronization. Project the rays of wisdom at your allies with a series of breathtaking chromatic lighting-effect with a simple tap of your fingertip.
Large Area Modern 3D Mesh
Sticking out with its mesh patterned front panel design, the ATHENA E1 Elite gives off a futuristic vibe as the Goddess of Wisdom presents herself in a fashionable debut. Nimble, Elegant, and Concise are the trademarks easily recognizable from the ATHENA E1 Elite PC Gaming Case.
Elite Expansion:
The ATHENA E1 Elite internal volume is 25% larger than it’s predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available.
One Press and Sync All
Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port.
Ample Accommodation
The accommodation inside ATHENA E1 Elite is able to support up to four 120mm or 140mm fans. Mounting points for 280mm, 240mm radiators at the top and 140mm or 120 mm radiator in the rear.
| HDD cage | “2 x 3.5″” or 1 x 2.5″”+1 x 3.5″” | ||||||
| VGA | 340mm | ||||||
| PSU | 180mm | ||||||
ATHENA E1 ELITE OVERVIEW
“Beauty and Intelligence”
The ATHENA E1 Elite PC Case pertains to many an eye-catching design features such as the front 3D Mesh-Patterned front panel and chromatic effect to light your battle-station up, increased airflow efficiency for heat dissipation, alongside a side swinging tempered glass side panel that gives the Goddess of Wisdom a finishing touch to her battle armor. When combined altogether as one, the four exceptional elements provide an unique aura and style of its own to your gaming masterpiece!
| Specifications | |||||||
| Product Name | ATHENA E1 Elite | ||||||
| Case Type | Mid Tower | ||||||
| Motherboard Support | ATX, Micro-ATX, Mini-ITX | ||||||
| Synchronization | 5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE Motherboard | ||||||
| Color | Black | ||||||
| Expansion Slots | 7+3 | ||||||
| Material | SPCC & ABS & Tempered glass | ||||||
| Window | Left | ||||||
| Radiator Support | Top: 240 mm, 280mm Rear: 120 mm, 140mm |
||||||
| Fan Support | Top: 2 x 120mm , 2 x 140mm Front: 1 x 120 mm , 1 x 140mm Rear: 1 x 120mm , 1 x 140mm |
||||||
| Pre-installed Fans | Front: 1 x 120mm ARGB Fans Rear: 1 x 120mm Fan |
||||||
| Drive Bays | 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 3 x 2.5″ |
||||||
| I/O Port | USB 3.0 x1, USB 2.0 x1, HD Audio x1, Fan LED Control x1 | ||||||
| Clearance | CPU cooler height limitation: 190mm VGA length limitation: 340mm PSU length limitation: 180mm |
||||||
| Dimension(LxWxH) | 420 x 230 x 460 mm 16.5 x 9 x 18.1 inch |
||||||
Only logged in customers who have purchased this product may leave a review.
Related Products
- Model No: TGC-A-63
- Model name: ARMOUR
- Case Form Factor: ATX
- Material: 0.6mm, SPCC Black,
- Window: Left glass,right metal
- Motherboard Type: ATX,micro ATX
- Front Panel Ports: USB3.0*1+USB1.1*2 HD Audio
- Cooling System: Front: 3x 120mm (included) or 3x140mm, Top:2x 120mm or 3x140mm(optional), Rear: 1x 120mm or 1x 140mm (optional)
- Asymmetry Mesh Design
- 2 Built-in 200mm Dual Rings ARGB Fans
- I/O Front Panel With ARGB Streaming Lighting
- ARGB Sync Via Motherboard
- Power Cover Design
- Magnetic Dust Filter
- Seamless Tempered Glass Window
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
- Selectable High/Mid/Low Fan Speed
- Liquid Cooling Support(Fans are Optional) TOP:24CM
- USB3.0*1+USB2.0*2+HD AUDIO
- 3.5″ HDD:2 2.5″ SSD:2
- Front panel&Left Side Panel:Tempered Glass
- 4mm Tempered Glass Panels
- Aggressive Design
- 7 Expansion Slot
- Maximize Cooling Airflow
- Excellent Expandability
- Handy I/O Ports
1 .0.6mm thickness SPCC, dimension ：380*185*425mm.
2. Plastic front panel with Tempered glass; 1*USB3+2*USB2(1.1).
3. Left side with Tempered Glass and CNC aluminum screws
4. With 1.5mm thickness plastic+EVA feet pads.
5. Fans capability: 3pcs*12CM Fan in the Front, 1pc*12CM Fan at Rear.
6. 3pcs*12CM Fan at power supply cage . Total 7pcs Fans.
7.Support 120mm cooling in the front, 240mm cooling at top, 120mm cooling at rear.
| Motherboard Type | Mini ITX / Micro ATX / ATX / CEB | |
|---|---|---|
| Dimensions (WxHxD) | 368 x 631 x 744(mm) 14.5 x 24.8 x 29.3 (in) |
|
| I/O Panel | USB 3.1 Type-C x 1 / USB3.0 x 2 / Mic x 1 / Audio x 1 / Power button / RGB control button | |
| 3.5″ Drive Bay | ||
- LEFT SIDE PANEL:TEMPERED GLASS
- GPU Length Fan support : Front : 3 x 12cm
- Casing size : 370 x 213 x 445mm USB3.0 x 1
- Card Slot Radiator support : Front 240mm
- Trapezoidal Tempered Glass Panel
- 3 Built-in 120mm Trio Rings ARGB Fans
- Seamless Tempered Glass Window
- Support RGB Motherboard Sync Software
- Power Cover Design
- Magnetic Dust Filter
- One Touch to Easily Switch RGB Streaming Lighting Style, and LED off
- Model No: TGC-A-63
- Model name: ARMOUR
- Case Form Factor: ATX
- Material: 0.6mm, SPCC Black,
- Window: Left glass,right metal
- Motherboard Type: ATX,micro ATX
- Front Panel Ports: USB3.0*1+USB1.1*2 HD Audio
- Cooling System: Front: 3x 120mm (included) or 3x140mm, Top:2x 120mm or 3x140mm(optional), Rear: 1x 120mm or 1x 140mm (optional)
- Aircraft Grade Anodize-Brushed Steel Coated Anterior
- Adjustable ARGB I/O Port & Power-Switch via “LED” Button located on the I/O Panel
- Support Motherboards up to the size of micro-ATX + Motherboard RGB Sync via 5V3-Pin Addressable RGB Headers
- Hinged Tempered-Glass Panel Layout
- Magnetic Dust Filter
- Power Cover Design
- Hyper-Efficient Rear-Mounted I/O Panel Design
Reviews
There are no reviews yet.